• Only use PAVATAPE on dry, clean and dust-free Pavatex board
• Use after fitting boards and always BEFORE installing battens
• Two priming solutions are available dependent on weather conditions: For temperatures between 5 - 10 degC use PAVZTP05 (solvent based) use PAVZTP5 (water-based).
•  PAVATAPE should not be applied if the temperature is below 5 degC.
• Apply Pavatex PRIMER with a brush or roller onto the board and abutments and allow to dry: Water-based 30 and 60 minutes drying time; solvent based prime, 20min.
• Store Pavatex PAVATAPE rolls on a flat surface in a dry dust-free environment.
• Shelf life when stored at around 20 degC is unlimited for PAVATAPE. PRIMER needs to be used within 12 month after manufacture.
• Coverage - Primers - Water based - 5litre tins, enough for 6 rolls of Pavatape. Solvent based - 500ml tins, enough for 1 roll of Pavatape
• Pavatape comes in 150mm wide, 15m rolls.

econstruction products supply all fixings and fittings required for our systems - assuring quality and our warranty can be applied.

We recommend Ejot and Fisher fixings for our Pavatex insulation boards - they are available direct from us, and our representatives can advise on correct quantities, tools etc